Canon imagePROGRAF iPF770 MFP M40 User Guide - Page 438

Stand Stand • Printer Stand ST-34 iPF770 Printer Parts a Accessory Pocket Stores printer accessories. Printer parts b Output Stacker Printed documents are ejected into the output tray. c Locking Caster Lock to immobilize the caster. Before moving the printer, always unlock all four casters. Moving the printer while casters are locked may scratch the casters or the floor. d Adjustable Stopper Pull out depending on the paper size when using the output stacker in the Extended position A. For details on the extended position, see "Using the Output Stacker." ➔P.346 e Paper Guide Guides printed documents into the output stacker. f Output stacker handle This handle is grasped and supports the sliding output stacker when putting the output stacker into Extended position B and returning it to the regular position. For details on the extended position, see "Using the Output Stacker." ➔P.346 g Output stacker release lever Pull this lever towards you to release Extended position B. For details on the extended position, see "Using the Output Stacker." ➔P.346 h Output Stacker Ejection Guides This guide supports the paper that is output when using the output stacker in Extended position B. • The Stand that can be used with this printer is Printer Stand ST-34 and Printer Stand ST-33. Either one or the other Note of these Stand is included with the printer depending on the region and time when you purchased the printer. • The output stacker of the Printer Stand ST-33 has a regular position and an Extended position A. 438 For details on the extended position, see "Using the Output Stacker." ➔P.346 • The Stand is described in the illustration of Printer Stand ST-34. Note that the illustrations may look different from the appearance of your printer in some cases. User's Guide