Canon imagePROGRAF iPF770 MFP M40 User Guide - Page 420
Replace P.head, Head Cleaning
View all Canon imagePROGRAF iPF770 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 420 highlights
Menu Settings Adjust Printer Feed Priority Setting Item Adjust Length AdjustmentPrint A:High B:Standard/Draft Change A:High Settings B:Standard/Draft Control Panel Mainte- Head Cleaning nance Printer Menu Nozzle Check Replace P.head Repl. maint cart Head Info GL2 Replot GL2 BufferClear GL2 Quality Settings Manag- er Color Mode (*3) Monochrome Color (CAD) 1 Color (CAD) 2 Color (CAD) 3 Color (CAD) 4 Color (CAD) 5 Print Quality Input Resolution 420 Print (Economy) iPF770 Description, Instructions Print a test pattern for particular types of paper to compensate for paper stretching or shrinkage, after which you enter the amount of adjustment. (See "Adjusting Line Length.") ➔P.491 Displayed when you have selected Feed Priority > Adj. Priority > Print Length. Adjustment relative to the amount of stretching or shrinkage of the current paper. Enter either the adjustment results from AdjustmentPrint or the discrepancy that you measured (as a percentage). For paper that tends to stretch, increase the feed amount by choosing a higher adjustment value. For paper that tends to shrink, decrease the feed amount by choosing a lower adjustment value. (See "Adjusting Line Length.") ➔P.491 Clean the Printhead. (See "Cleaning the Printhead.") ➔P.503 Choose Head Cleaning A if printing is faint, oddly colored, or contains foreign substances. Choose Head Cleaning B if no ink is printed at all, or if printing is not improved by Head Cleaning A. Print a test pattern to check the nozzles. Execute when replacing the Printhead. Follow the instructions displayed to complete the required procedure. (See "Replacing the Printhead.") ➔P.504 Not displayed during a warning message that the remaining Maintenance Cartridge capacity is low. Execute when replacing the Maintenance Cartridge. Follow the instructions displayed to complete the required procedure. (See "Replacing the Maintenance Cartridge.") ➔P.509 Indicates information about the printhead. Clear the print data in the replot buffer. Print in monochrome. Print in monochrome. Print in standard colors. Print with approximate colors emulating Canon iPF750, iPF755, iPF650, iPF655, iPF760, iPF765. Print emulating the following printers, in colors resembling colors produced by these printers: Canon iPF500, iPF600, iPF700, iPF510, iPF610, iPF710, iPF605, iPF720, iPF810, iPF820, iPF815 and iPF825. Print emulating the HP Designjet 500/800, in colors resembling colors produced by these printers. Print emulating the HP Designjet T1100, in colors resembling colors produced by this printer. Choose the print quality. Choose the printer input resolution, 600dpi or 300dpi. When On is selected, print using less ink. However, the quality is lower than regular printing. Select On to conserve ink such as the layout confirmation. Note that although Print (Economy) is only available when Fast is selected in Print Quality, it might not be available depending on the paper type. User's Guide