Canon imagePROGRAF iPF770 MFP M40 User Guide - Page 61

iPF770 Resizing Originals to Fit the Roll Width (Mac OS) 4 In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper. 5 Select the printing application in the E Print Target list. 6 Click the Page Setup tab to display the Page Setup sheet. Enhanced Printing Options Printing enlargements or reductions 7 Select and click a roll paper in the L Paper Source list. 8 In the A Page Size list, click the size of the original as specified in the application. In this case, click ISO A4 or Letter (8.5"x11"). 9 Select the C Enlarged/Reduced Printing check box. • If the C Enlarged/Reduced Printing check box is Note not displayed on the Page Setup sheet, clear the B Borderless Printing check box. 10 Click E Fit Roll Paper Width. • After you click E Fit Roll Paper Width, the Information dialog box is displayed. Select the width of the Note loaded roll in the Roll Paper Width list and click OK. • Make sure the roll paper width you specify matches the width of the loaded roll. 11 Confirm the print settings and print as desired. • For tips on confirming print settings, see "Confirming Print Settings ." ➔P.143 Note 61 Resizing Originals to Fit the Roll Width (Mac OS) This topic describes how to enlarge originals before printing to match the roll width, based on the following example. • Document: Any Type • Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in]) • Paper: Roll paper User's Guide