Canon imagePROGRAF iPF770 MFP M40 User Guide - Page 342
Printing From a Desired Starting Point, Width Detection
View all Canon imagePROGRAF iPF770 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 342 highlights
Handling and Use of Paper Printing From a Desired Starting Point iPF770 5 Press the OK button. • If a print job was received The printer now starts printing the print job. • If no print job was received A menu for selection of the type of paper is automatically shown on the Display Screen. Press ▲ or ▼ to select the type of paper, and then press the OK button. The printer now starts feeding the paper. • Refer to Paper Reference Guide for details on type of paper to select. (See "Displaying the Paper Refer- Note ence Guide.") ➔P.313 Printing From a Desired Starting Point When printing inside boundaries or in other situations when you want to specify a particular position to start printing from, set Width Detection to Off in the printer menu for the type of paper used. Set Width Detection to Off 1 On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Paper tab ( ). Handling sheets • If the Tab Selection screen is not displayed, press the Menu button. Note 2 Press the OK button. The Paper Menu is displayed. 3 Press ▲ or ▼ to select Paper Details, and then press the OK button. 4 Press ▲ or ▼ to select the type of paper, and then press the OK button. 5 Press ▲ or ▼ to select Width Detection, and then press the OK button. 6 Press ▲ or ▼ to select Off, and then press the OK button. Load paper in the desired position to start printing from Follow these instructions to load paper at the desired starting position for printing when Width Detection is Off. 1 If you did not send a print job in advance, a menu for selection of the type of paper is displayed. Press ▲ or ▼ to select the type of paper, and then press the OK button. • If a print job was received before paper was advanced, the media type and size specified by the job are 342 Note shown on the Display Screen. Thus, this screen is not displayed. Go to step 2. 2 "Width Detection OFF. OK to continue?" is now shown on the Display Screen. Press ▲ or ▼ to select "Leave OFF", and then press the OK button. 3 After a menu for selection of the paper size is displayed, press ▲ or ▼ to select the paper size, and then press the OK button. User's Guide