Canon imagePROGRAF iPF770 MFP M40 User Guide - Page 571
Other Messages, GARO Wxxxx (x represents a number), ERROR Exxx-xxxx (x represents a letter or number)
View all Canon imagePROGRAF iPF770 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 571 highlights
iPF770 GARO Wxxxx (x represents a number) Other Messages GARO Wxxxx (x represents a number) ...571 ERROR Exxx-xxxx (x represents a letter or number 571 Hardware error. xxxxxxxx-xxxx (x represents a letter or number 571 Top cover is open...572 Prepare for parts replacement...572 Parts replacement time has passed...572 Unknown file...572 Multi-sensor error ...572 Error in cutter position...572 GARO Wxxxx (x represents a number) Cause There is a problem with the print job. Corrective Action Try printing again, using the correct printer driver. It is also possible to continue printing in this state. However, you may not be able to obtain the desired printing results. ERROR Exxx-xxxx (x represents a letter or number) Cause Corrective Action An error requiring service may have occurred. Write down the error code and message, turn off the printer, and contact your Canon dealer for assistance. Error Message Other Messages Hardware error. xxxxxxxx-xxxx (x represents a letter or number) Cause The last portion of roll paper was used during a print job. The paper was not advanced because the trailing edge is taped to the roll. Fastening tape or the Belt Stopper has not been removed inside the Top Cover. An error requiring service may have occurred. Corrective Action Turn off the printer and remove the roll from the printer before restoring power. Turn off the printer, open the Top Cover and remove the tape or the Belt Stopper before restoring power. Turn off the printer and wait at least three seconds before restoring the power. If the message is displayed again, write down the error code and message, turn off the printer, and contact your Canon dealer for assistance. Hardware error. 03130031-2F7x (x is 0, 1, or 2) 571 Cause The ink tank is not installed correctly. Corrective Action Turn off the power, remove and then reinstall all of the ink tanks, and then turn on the power. If the same message is displayed again, write down the error code and message, turn off the printer, and contact your Canon dealer for assistance. (See "Replacing Ink Tanks.") ➔P.496 User's Guide