Canon imagePROGRAF iPF770 MFP M40 User Guide - Page 449
Configuring the Printer Driver Destination (Windows), Welcome to the Add Standard TCP/IP Printer Port
View all Canon imagePROGRAF iPF770 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 449 highlights
iPF770 Configuring the Printer Driver Destination (Windows) 6 Press ▲ or ▼ to select IPv6 Support, and then press the OK button. 7 Press ▲ or ▼ to select On, and then press the OK button. • Once you set IPv6 Support to On, the IPv6 StlessAddrs setting takes effect. Important • You can also configure IPv6 StlessAddrs and DHCPv6 from the printer Control Panel. Note Configuring the Printer Driver Destination (Windows) This topic describes how to specify the printer driver destination if the printer's IP address is changed, or if you will use the printer over a network connection instead of via USB connection. The procedure described below is the configuration based on the LPR or Raw protocol using the standard TCP/IP port in Windows ( Standard TCP/IP Port ). • If you will use the printer in a TCP/IP network, make sure the printer's IP address is configured correctly. Important • Configuring the IP Address on the Printer ➔P.446 Network Setting • This section describes the procedure in Windows 7. Note Initial Settings 1 Open the Devices and Printers window. 2 Right-click the icon of this printer and choose Printer Properties to open the printer properties window. 3 Click the Port tab to display the Port sheet. 4 Click Add Port to display the Printer Ports dialog box. 5 In the Available Port list, select Standard TCP/IP Port. 6 Click New Port. After the wizard starts, a window is displayed for the Welcome to the Add Standard TCP/IP Printer Port Wizard. 7 Click Next. 8 In Printer Name or IP Address, enter the printer's IP address. If the DNS is configured, you can also enter the DNS Domain Name. 9 Follow the instructions on the screen to add a printer port. 10 Click Close to close the Printer Ports dialog box. 11 Make sure the printer port you added is displayed under Ports, and that the port is selected. 12 Click Close to close the printer properties window. 449 Configuring the Printer Driver Destination (Mac OS) Specify the printer driver destination as follows if the printer's IP address is changed, or if you will use the printer over a network connection instead of via USB connection. • If you switch to printing in a TCP/IP network, or if the printer's IP address is changed, see "Configuring the Destination in TCP/IP Networks ." ➔P.453 User's Guide