Compaq 315eu Maintenance and Service Guide - Compaq 100eu Small Form Factor, 1 - Page 107

Removing the Front I/O Board from the Bracket, Remove the Front USB Assembly

Get Compaq 315eu - Microtower PC PDF manuals and user guides View all Compaq 315eu manuals
Add to My Manuals
Save this manual to your list of manuals

Page 107 highlights

5. Disconnect the front USB cable from the yellow system board connector (F_AUDIO) and the I/O cable from the white system board connector (USB2). 6. Remove the silver Torx screw (1) that secures the panel to the chassis. 7. Pull the panel (2) away from the unit while guiding the wires through the hole in the front of the chassis. Figure 7-22 Remove the Front USB Assembly 8. If you need to remove the front I/O board from the bracket, remove the two Torx screws (1) that secure the board to the bracket, and then slide the board out of the bracket (2). Figure 7-23 Removing the Front I/O Board from the Bracket To reinstall the panel, reverse the removal procedure. Front USB Panel 97

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
5.
Disconnect the front USB cable from the yellow system board connector (F_AUDIO) and the I/O
cable from the white system board connector (USB2).
6.
Remove the silver Torx screw
(1)
that secures the panel to the chassis.
7.
Pull the panel
(2)
away from the unit while guiding the wires through the hole in the front of the
chassis.
Figure 7-22
Remove the Front USB Assembly
8.
If you need to remove the front I/O board from the bracket, remove the two Torx screws
(1)
that
secure the board to the bracket, and then slide the board out of the bracket
(2)
.
Figure 7-23
Removing the Front I/O Board from the Bracket
To reinstall the panel, reverse the removal procedure.
Front USB Panel
97