Compaq 315eu Maintenance and Service Guide - Compaq 100eu Small Form Factor, 1 - Page 133

Drive Cable Assembly Description Hard drive/optical drive cable assembly Spare part number 623375-001 A single drive cable provides data and power to both the hard drive and the optical drive. The cable connects both drives to the system board, as well as connects to a power connector on the system board. 1. Prepare the computer for disassembly (see Preparing to disassemble the computer on page 106). 2. Remove the stand (see Stand on page 111). 3. Remove the hinge cover (see Hinge Cover on page 112). 4. Remove the memory/optical drive cover (see Memory/Optical Drive Cover on page 107). 5. Remove the rear cover (see Rear Cover on page 113). 6. Remove the rear metal cover (see Rear Metal Cover on page 118). 7. Disconnect the cable from the following connectors: ● (1): Optical drive ● (2): Hard drive ● (3): 2 system board SATA connectors (hard drive = SATA0, optical drive = SATA1) ● (4): system board power connector (SATA_PWR) 8. Remove the cable from the clip on the base of the computer (5), and then lift the cable assembly from the computer. Figure 8-17 Removing the drive cable To replace the drive cable assembly, reverse the removal procedures. Drive Cable Assembly 123