Compaq 315eu Maintenance and Service Guide - Compaq 100eu Small Form Factor, 1 - Page 72

Front I/O Assembly

Get Compaq 315eu - Microtower PC PDF manuals and user guides View all Compaq 315eu manuals
Add to My Manuals
Save this manual to your list of manuals

Page 72 highlights

Front I/O Assembly Description Front I/O assembly with 6-in-1 card reader Spare part number 619960-001 The front I/O panel includes three USB connectors, two audio connectors, and a card reader. The panel is secured with one screw. 1. Prepare the computer for disassembly (Preparation for Disassembly on page 43). 2. Remove the access panel (Access Panel on page 44) 3. Lay the computer on its side with the front facing toward you. 4. Remove the front bezel (Front Bezel on page 45). 5. Unplug the cables from the following system board connectors: ● F_AUDIO (yellow connector) ● USB1 (white connector; double gray cable) ● USB5 (black connector; single gray cable) ● USB6 (black connector; single black cable) 6. Remove the screw that secures the assembly to the chassis (1), and then pull the assembly up and away from the chassis (2) while guiding the cables through the hole in the chassis. 7. If you need to remove the card reader from the front I/O assembly, cue the plastic tie that secures the card reader cable to the front I/O cables. 62 Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
Front I/O Assembly
Description
Spare part number
Front I/O assembly with 6-in-1 card reader
619960-001
The front I/O panel includes three USB connectors, two audio connectors, and a card reader. The
panel is secured with one screw.
1.
Prepare the computer for disassembly (
Preparation for Disassembly
on page
43
).
2.
Remove the access panel (
Access Panel
on page
44
)
3.
Lay the computer on its side with the front facing toward you.
4.
Remove the front bezel (
Front Bezel
on page
45
).
5.
Unplug the cables from the following system board connectors:
●
F_AUDIO (yellow connector)
●
USB1 (white connector; double gray cable)
●
USB5 (black connector; single gray cable)
●
USB6 (black connector; single black cable)
6.
Remove the screw that secures the assembly to the chassis
(1)
, and then pull the assembly up
and away from the chassis
(2)
while guiding the cables through the hole in the chassis.
7.
If you need to remove the card reader from the front I/O assembly, cue the plastic tie that
secures the card reader cable to the front I/O cables.
62
Chapter 6
Removal and Replacement Procedures Microtower (MT) Chassis