Compaq 315eu Maintenance and Service Guide - Compaq 100eu Small Form Factor, 1 - Page 122

Hinge Cover

Page 122 highlights

Hinge Cover Description Hinge cover Spare part number 625121-001 The hinge cover is located under the stand and secure with two screws. You must remove it to remove the memory/optical drive cover. 1. Prepare the computer for disassembly (see Preparing to disassemble the computer on page 106). 2. Remove the stand (see Stand on page 111). 3. Remove the two black Phillips PM 2.0x6.0 screws (1) that secure the cover to the computer. 4. Lift the bottom of the cover, rotate it up, and then lift the cover off the computer (2). Figure 8-6 Removing the hinge cover To replace the cover, reverse the removal procedures. 112 Chapter 8 Removal and Replacement Procedures All-in One (AIO) Chassis

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215

Hinge Cover
Description
Spare part number
Hinge cover
625121-001
The hinge cover is located under the stand and secure with two screws. You must remove it to
remove the memory/optical drive cover.
1.
Prepare the computer for disassembly (see
Preparing to disassemble the computer
on page
106
).
2.
Remove the stand (see
Stand
on page
111
).
3.
Remove the two black Phillips PM 2.0x6.0 screws
(1)
that secure the cover to the computer.
4.
Lift the bottom of the cover, rotate it up, and then lift the cover off the computer
(2)
.
Figure 8-6
Removing the hinge cover
To replace the cover, reverse the removal procedures.
112
Chapter 8
Removal and Replacement Procedures All-in One (AIO) Chassis