Compaq 315eu Maintenance and Service Guide - Compaq 100eu Small Form Factor, 1 - Page 55
Front Bezel, Removing the Front Bezel
View all Compaq 315eu manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Front Bezel Description Front bezel Bezel blank Spare part number 622203-001 622199-001 The front bezel is held onto the computer with three tabs. 1. Prepare the computer for disassembly (Preparation for Disassembly on page 43). 2. Remove the access panel (Access Panel on page 44). 3. Press outward on the three latches on the right side of the bezel (1), then rotate the right side of the bezel off the chassis (2) followed by the left side. Figure 6-2 Removing the Front Bezel 4. To remove the a bezel blank, gently twist and pull on the bezel blank until it breaks free from the front bezel. Replacement bezel blanks are available using spare part number 622199-001 NOTE: The appearance of the front bezel may vary. To reinstall the front bezel, reverse the removal procedure. Front Bezel 45