Compaq 315eu Maintenance and Service Guide - Compaq 100eu Small Form Factor, 1 - Page 97
Removing an Optical Drive, Preparation for Disassembly, on Access Panel, Front Bezel
View all Compaq 315eu manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Table 7-2 System Board Drive Connections No. System Board Connector Color 1 SATA1 dark blue 2 SATA2 white Table 7-3 PowerAdapter Cable Connectors Drive Power Cable Connector Hard drive P1 Optical drive P2 Removing an Optical Drive NOTE: An optical drive is a DVD-ROM or SuperMulti LightScribe DVD-RW drive. CAUTION: All removable media should be taken out of a drive before removing the drive from the computer. To remove an optical drive: 1. Prepare the computer for disassembly (Preparation for Disassembly on page 77). 2. Remove the access panel (Access Panel on page 78). 3. Remove the front bezel (Front Bezel on page 79). 4. Remove the two screws on the front of the chassis that secure the optical drive cage to the chassis. Figure 7-7 Removing the Optical Drive Screws Drives 87