Compaq 315eu Maintenance and Service Guide - Compaq 100eu Small Form Factor, 1 - Page 132
Driver Board
View all Compaq 315eu manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Driver Board Description Driver board PHB (for panel) Spare part number 623388-001 The driver board is mounted atop the optical drive cage. The board connects three display cables and is secured with two screws. 1. Prepare the computer for disassembly (see Preparing to disassemble the computer on page 106). 2. Remove the stand (see Stand on page 111). 3. Remove the hinge cover (see Hinge Cover on page 112). 4. Remove the memory/optical drive cover (see Memory/Optical Drive Cover on page 107). 5. Remove the rear cover (see Rear Cover on page 113). 6. Remove the rear metal cover (see Rear Metal Cover on page 118). 7. Disconnect the two LIF connectors on the top of the board (1) and the connector on the bottom of the board (2). 8. Remove the two silver Torx 2.5x7.0 screws that secure the board to the computer (3), and then lift the board up and out of the computer.. Figure 8-16 Removing the driver board To replace the driver board, reverse the removal procedures. 122 Chapter 8 Removal and Replacement Procedures All-in One (AIO) Chassis