Compaq Pro 6300 Maintenance & Service Guide Elite 8300 Touch All-in-One Bu - Page 127
Updating BIOS when installing a display panel for a different manufacturer, Advanced, Device Options
View all Compaq Pro 6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Updating BIOS when installing a display panel for a different manufacturer If you install a display panel from a different manufacturer than what was previously installed (for example, replace an LG panel with a Samsung panel), you need to update BIOS with the new panel information. Failure to do so may cause the new panel to function incorrectly. To update BIOS with the new panel model information: 1. Boot the computer. 2. Repeatedly press F10 when the monitor light turns green to access the F10 Setup utility. 3. Select Advanced, select Device Options, select LVDS Panel Select, and then select the manufacturer for the new display panel. 4. Save your settings, exit F10 Setup, and allow the computer to continue to the operating system. 5. Reboot the computer and repeatedly press F10 when the monitor light turns green to access the F10 Setup utility. 6. Select Advanced, select Device Options, and then select LVDS Panel Select. 7. Select Auto-select. When you change the LVDS setting to the installed panel type, the BIOS reprograms the EDID with the correct data. You must set the panel before the Auto-select setting functions correctly. Display panel 117