Compaq Pro 6300 Maintenance & Service Guide Elite 8300 Touch All-in-One Bu - Page 61
Metal plate, Remove the stand see
View all Compaq Pro 6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Metal plate The metal plate is located under the stand. Figure 7-14 Metal plate location To remove the metal plate: 1. Prepare the computer for disassembly (see Preparing to disassemble the computer on page 40). 2. Remove the access panel (see Access panel on page 45). 3. Remove the stand (see Stand on page 48). 4. Remove the lower panel (see Lower panel on page 50). 5. Remove the two Torx screws (1) securing the metal plate to the chassis. Metal plate 51
Metal plate
The metal plate is located under the stand.
Figure 7-14
Metal plate location
To remove the metal plate:
1.
Prepare the computer for disassembly (see
Preparing to disassemble the computer
on page
40
).
2.
Remove the access panel (see
Access panel
on page
45
).
3.
Remove the stand (see
Stand
on page
48
).
4.
Remove the lower panel (see
Lower panel
on page
50
).
5.
Remove the two Torx screws
(1)
securing the metal plate to the chassis.
Metal plate
51