D-Link DES-1210-52 Product Manual - Page 77
Logout, Syntax, Example, Parameter, Description, Reboot - 28p vlan
UPC - 790069327827
View all D-Link DES-1210-52 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
6 Command Line Interface D-Link Web Smart Switch User Manual Logout This command closes the current connection. Syntax logout Example DES-1210-28P> logout Figure 118 - The logout command Ping This command checks if another IP address is reachable on the network. You can ping the IP address connected to through the managed VLAN (VLAN 1 by default), as long as there is a physical path between the switch and the target IP equipment. By default, Switch sends five pings to the target IP. Syntax ping [times ] [timeout ] Parameter Parameter Description The IP address of the target station. times timeout (1-99)> ping 10.90.90.91 times 3 timeout 1 Reply Received From :10.90.90.91, TimeTaken : 20 msecs Reply Received From :10.90.90.91, TimeTaken : 20 msecs Reply Received From :10.90.90.91, TimeTaken : 20 msecs --- 10.90.90.91 Ping Statistics --3 Packets Transmitted, 3 Packets Received, 0% Packets Loss DES-1210-28P> Figure 119 - The ping command Note: DES-1210-08P does not support times and timeout configurations. Reboot This command reboots the system. All network connections are terminated and the boot code executes. Syntax reboot Example DES-1210-28P> reboot % Device will reboot, please wait a few minutes to re-login. DES-1210-28P> 71