D-Link DFL-200 Product Manual - Page 48
VPN between client and an internal network, , Creating a Roaming Users IPSec Tunnel
UPC - 790069268823
View all D-Link DFL-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
VPN between client and an internal network In the following example users can connect to the main office internal network from anywhere on the Internet. Communication between the client and the internal network takes place in an encrypted VPN tunnel that connects the DFL-200 and the roaming users across the Internet. DFL-200 Firewall The example shows a VPN between a roaming VPN client and the internal network, but you can also create a VPN tunnel that uses the DMZ network. The networks at the ends of the VPN tunnel are selected when you configure the VPN policy. Creating a Roaming Users IPSec Tunnel Follow these steps to add a roaming user tunnel. Step 1. Go to Firewall and VPN and choose Add new under IPSec. Step 2. Enter a Name for the new tunnel in the name field. The name can contain numbers (0-9) and upper and lower case letters (A-Z, a-z), and the special characters and _. No other special characters and spaces are allowed. Step 3. Specify your local network, or your side of the tunnel, for example 192.168.1.0/255.255.255.0, in the Local Net field. This is the network your roaming VPN clients should be allowed to connect to. Step 4. Choose authentication type, either PSK (Pre-shared Key) or Certificate-based. If you choose PSK, make sure the clients use exactly the same PSK. Step 5. For Tunnel Type, choose Roaming User. Click the Apply button below to apply the changes or click Cancel to discard changes. 48