D-Link DSL-2740B User Manual - Page 34
Manual WIRELESS Connection Setup SETTINGS, Enable Auto Channel Scan - access point mode
View all D-Link DSL-2740B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Section 3 - Configuration Manual WIRELESS Connection Setup SETTINGS Click on the Enable Wireless box to allow the router to operate in the wireless environment. You can use the Add New button to set the schedule. The SSID identifies members of the Service Set. Accept the default name or change it to something else. If the default SSID is changed, all other devices on the wireless network must also use the same SSID. Enable Auto Channel Scan so that the router can select the best possible channel for your wireless network to operate on. The Wireless Channel can let you select the channel of your access point. Channel availability is different for different countries due to their regulation. Select 802.11 Mode to operate in b/g/n mode. Or select specified mode to use. 802.11b only, 802.11g only, 802.11n only. Mixed 802.11g and 802.11b which means DSL-2740B will detect the clients to use 802.11g or 802.11b to synchronize. Mixed 802.11n, 802.11g and 802.11b which means DSL-2740B will detect the clients to use 802.11n, 802.11g or 802.11b to synchronize. Channel Width, Choose 20MHz or Auto 20/40MHz to decide the Transmission Rate. Transmission Rate, suggest keeping the Best (automatic) selection. This is related to Receive Sensitivity as follows, MCS 0 MANRATE HT20/GI=0 HT40/GI=0 HT40/GI=1 0x80 6.5Mbps 13.5Mbps X D-Link DSL-2740B User Manual 34