D-Link DSL-2740B User Manual - Page 54
Inbound Filter
View all D-Link DSL-2740B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Section 3 - Configuration INBOUND FILTER By default, all incoming IP traffic from the internet network is allowed. The Inbound Filter allows you to create a filter rule to filter incoming IP traffic by specifying a filter name and at least one condition below. All of the specified conditions in this filter rule must be satisfied for the rule to take effect. ADD OUTBOUND IP FILTER Type the filter name on the Filter Name. Choose ICMP, TCP/UDP, TCP or UDP on the Protocol. Type Source IP address, Source Subnet Mask and Source Port(port or port::port means from which port to which port) Type Destination IP address, Destination Subnet Mask and Destination Port(port or port::port means from which port to which port) Set the policy schedule on the Schedule, Always or never, or View Available Schedules Please click Add/Apply button to add the policy in the list. D-Link DSL-2740B User Manual 54