D-Link G604T Product Manual - Page 34
Connection Type, Bridge Mode, Restart
UPC - 790069265662
View all D-Link G604T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
connection. If you have been given specific settings for this to configure, type in the correct values assigned by your ISP. 3. Choose the Connection Type from the pull-down menu. This defines both the connection protocol and encapsulation method used for your ADSL service. The available options are PPPoA VC-MUX, PPPoA LLC and PPPoE LLC. If have not been provided specific information for the Connection Type setting, leave the default setting. 4. Click Next to proceed to next page. Connection Type: Bridge Mode 1. In Bridge mode, the next page will prompt you to enter the VPI / VCI / Connection Type. Do not change the VPI or VCI value unless you have been told to do so. These numbers are used to define a unique path for your connection. If you have been given specific settings for this to configure, type in the correct values assigned by your ISP. 2. For bridge mode Connection Type, the available encapsulation methods are 1483 Bridged IP LLC and 1483 Bridged IP VC-Mux. If you are unsure of the connection type, please ask your service provider. 3. Click Next to proceed to next page. Note If your service provider has instructed you to change the VPI or VCI value for your ADSL connection, use the WAN menu to change these. Finally you can confirm that the setup process is completed. If you are satisfied that you have entered all the necessary information correctly, click the Restart button to save the new configuration settings and restart the Router. If you need to change settings from a previous menu, click the Back button.