D-Link G604T Product Manual - Page 52
Dynamic Routing RIP
UPC - 790069265662
View all D-Link G604T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Dynamic Routing (RIP) The Router supports RIP v1 and RIP v2 used to share routing tables with other Layer 3 routing devices on your local network or remote LAN. Figure 4- 6. RIP menu To enable RIP, select Enabled from the RIP pull-down menu, select the Protocol (RIPv1, RIPv2 and RIPv1 Compatible) and Direction (In, Out, or Both), and click Apply. The RIPv1 Compatible option will respond to or send RIP requests compatible with both RIP v1 and RIP v2. The direction configuration refers to the RIP request. Select In to allow RIP requests from other devices. Select Out to instruct the Router to make RIP requests for routing tables from other devices. Select Both to share routing tables in both directions.
Dynamic Routing (RIP)
The Router supports RIP v1 and RIP v2 used to share routing tables with other Layer 3 routing devices on your
local network or remote LAN.
Figure 4- 6. RIP menu
To enable RIP, select
Enabled
from the
RIP
pull-down menu, select the
Protocol
(
RIPv1
,
RIPv2
and
RIPv1
Compatible
) and
Direction
(
In
,
Out
, or
Both
), and click
Apply
.
The RIPv1 Compatible option will respond to or send RIP requests compatible with both RIP v1 and RIP v2.
The direction configuration refers to the RIP request. Select In to allow RIP requests from other devices. Select
Out to instruct the Router to make RIP requests for routing tables from other devices. Select Both to share
routing tables in both directions.