D-Link G604T Product Manual - Page 7
Packing List - dsl manual
UPC - 790069265662
View all D-Link G604T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
DSL-G604T Wireless A DSL Router User's Guide nformation you will need about your DSL-G604T ADSL Router: Username This is the Username needed access the Router's management interface. When you attempt to connect to the device through a web browser you will be prompted to enter this Username. The default Username for the Router is admin. The user cannot change this. Password This is the Password you will be prompted to enter when you access the Router's management interface. The default Password is admin. The user may change this. LAN IP addresses for the DSL-G604T This is the IP address you will enter into the Address field of your web browser to access the Router's configuration graphical user interface (GUI) using a web browser. The default IP address is 192.168.11 and it is referred to as the "Management IP" address in this User's Manual. This may be changed to suit any IP address scheme the user desires. This address will be the base IP address used for DHCP service on the LAN when DHCP is enabled. LAN Subnet Mask for the DSL-G604T This is the subnet mask used by the DSL-G604T, and will be used throughout your LAN. The default subnet mask is 255.255.255.0 - this can be changed later. Record info here Information you will need about your LAN or computer: Ethernet NIC If your computer has an Ethernet NIC, you can connect the DSL-G604T to this Ethernet port using an Ethernet cable. You can also use the Ethernet ports on the DSL-G604T to connect to other computer or Ethernet devices. Record info here DHCP Client status Your DSL-G604T ADSL Router is configured, by default, to be a DHCP server. This means that it can assign an IP address, subnet mask, and a default gateway address to computers on your LAN. The default range of IP addresses the DSL-G604T will assign are from 192.168.1.2 to 192.168.1.254. Your computer (or computers) needs to be configured to Obtain an IP address automatically (that is, they need to be configured as DHCP clients.) It is recommended that you collect and record this information here, or in some other secure place, in case you have to re-configure your ADSL connection in the future. Once you have the above information, you are ready to setup and configure your DSL-G604T ADSL Router. Packing List Open the shipping carton and carefully remove all items. Make sure that you have the items listed here. 1. One DSL-G604T 802.11g Wireless ADSL Ethernet Router 2. One CD-ROM containing the User's Guide 3. One twisted-pair telephone cable used for ADSL connection 4. One straight-through Ethernet cable 5. One 12V, 1.2A power adapter suitable for your electric service 6. One Quick Installation Guide 7. Rubber stand 4