Dell Dimension 2300C Dell Dimension 2300C Owner's Manual - Page 19
Attaching and Removing the Computer, Stand
View all Dell Dimension 2300C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Attaching and Removing the Computer Stand To attach the stand: 1 Rotate the computer to an upside-down position. 2 Insert the screw into the bottom of the stand. 3 Align the two tabs and the screw on the stand with the tab holes and screw hole in the bottom of the computer. screw screw hole HINT: Place your computer on a soft surface to prevent scratching the top cover. tabs (2) tab holes (2) 4 Tighten the screw. 5 Place the computer in the upright position. Setting Up and Using Yo ur Comput er 19
Setting Up and Using Your Computer
19
Attaching and Removing the Computer
Stand
To attach the stand:
HINT:
Place your
computer on a soft
surface to prevent
scratching the top cover.
1
Rotate the computer to an upside-down position.
2
Insert the screw into the bottom of the stand.
3
Align the two tabs and the screw on the stand with the tab holes and
screw hole in the bottom of the computer.
4
Tighten the screw.
5
Place the computer in the upright position.
tabs (2)
tab holes (2)
screw
screw hole