Dell Dimension 2300C Dell Dimension 2300C Owner's Manual - Page 59
Diagnostic Code, Definition, Corrective Action - pci
View all Dell Dimension 2300C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Diagnostic Code GYYY ABCD YGYY ABCD GGGY ABCD Definition No memory modules are detected. A PCI bus failure has occurred. Other failure has occurred. Corrective Action • Reinstall all memory modules (see page 82) and restart the computer. • To eliminate the possibility of a faulty memory connector, remove all memory modules, install one memory module (see page 82), and then restart the computer. If the computer starts normally, move the memory module to a different connector and restart the computer. Continue until you have identified a faulty connector or reinstalled all modules without error. • If the problem persists, contact Dell (see page 95). 1 Determine if a conflict exists by removing a card and then restarting the computer. 2 If the problem persists, reinstall the card that you removed, remove a different card (see page 80), and then restart the computer. 3 Repeat this process for each card. If the computer starts normally, troubleshoot the last card removed from the computer for resource conflicts (see "Resolving Software and Hardware Incompatibilities" on page 64). 4 If the problem persists, contact Dell (see page 95). • Ensure that the cables are properly connected from the hard drive, CD drive, and DVD drive to the system board (see page 77). • If the problem persists, contact Dell (see page 95). Advanced Troubleshooting 59