Dell Force10 E1200i FTOS Version 8.4.1.5 Configuration Guide for ExaScale - Page 1008

www.dell.com | support.dell.com The software clock runs only when the software is up. The clock restarts, based on the hardware clock, when the switch reboots. Command Syntax Command Mode Purpose clock set time month EXEC Privilege day year Set the system software clock to the current time and date. time: Enter the time in hours:minutes:seconds. For the hour variable, use the 24-hour format, for example, 17:15:00 is 5:15 pm. month: Enter the name of one of the 12 months in English. You can enter the name of a day to change the order of the display to time day month year. day: Enter the number of the day. Range: 1 to 31. You can enter the name of a month to change the order of the display to time day month year year: Enter a four-digit number as the year. Range: 1993 to 2035. FTOS#clock set 16:20:00 19 september 2009 FTOS# Set the timezone Coordinated Universal Time (UTC) is the time standard based on the International Atomic Time standard, commonly known as Greenwich Mean time. When determining system time, you must include the differentiator between UTC and your local timezone. For example, San Jose, CA is the Pacific Timezone with a UTC offset of -8. Command Syntax clock timezone timezone-name offset Command Mode Purpose CONFIGURATION Set the clock to the appropriate timezone. timezone-name: Enter the name of the timezone. Do not use spaces. offset: Enter one of the following: • a number from 1 to 23 as the number of hours in addition to UTC for the timezone. • a minus sign (-) followed by a number from 1 to 23 as the number of hours FTOS#conf FTOS(conf)#clock timezone Pacific -8 FTOS(conf)#01:40:19: %RPM0-P:CP %CLOCK-6-TIME CHANGE: Timezone configuration changed from "UTC 0 hrs 0 mins" to "Pacific -8 hrs 0 mins" FTOS# 1008 | System Time and Date