Dell Force10 E1200i FTOS Version 8.4.1.5 Configuration Guide for ExaScale - Page 349

Set the Frequency of FTSA Type 3 Messages When messaging is enabled, FTSA sends an E-mail every 24 hours containing inventory information to all recipients. There is no facility for setting the frequency for individual recipients. Task Set the frequency at which FTSA generates inventory E-mails. Range: 2 to 10080 minutes Default: 1440 minutes (24 hours) Command frequency minutes Command Mode CALLHOME Generate FTSA Type 4 Messages FTSA can collect and E-mail a user-defined subset of the local system log.These E-mails are Type 4, and Type 4 messages are enabled by default: Step Task 1 Ensure that system logging is on, and verify the logging severity level. 2 Collect and E-mail system log messages. • If you do not use the severity option, FTSA uses 7 by default. • This is the recommended severity level. Lower values will result in partial log data sent to the server because messages with higher values are filtered out. Command logging on do show running-config logging log-messages [delay minutes] [severity level] [filter string] Command Mode CONFIGURATION CONFIGURATION After the initial message, subsequent messages only include log entries with that were generated after the last message was sent to the server so that log messages are not repeated in multiple E-mails. Set Parameters FTSA Type 5 Messages FTSA Type 5 messages have two configurable parameters: Task Command Divert Type 5 messages to the internal flash directory /CALL-HOME-LOGS instead of sending them to FTSA recipients. Filenames include the action list name and a timestamp, and use the file extension .ftsa. All E-mails are generated in XML format by default. For Type 5 messages only, you may generate E-mails in clear text format. The configuration is per action list. log-only message-format {xml | text} Command Mode CALLHOME ACTIONLIST CALLHOME ACTIONLIST Force10 Service Agent | 349