Dell Force10 E1200i FTOS Version 8.4.1.5 Configuration Guide for ExaScale - Page 1090

www.dell.com | support.dell.com Command show hardware rpm slot-number cp {data-plane | management-port} | party-bus} {counters | statistics} show hardware rpm slot-number {rp1 | rp2} {data-plane | party-bus} {counters | statistics} show hardware linecard number port-set pipe-number fpc forward {counters | drops | spi {err-counters | spichannel# counters} | status} show hardware linecard number port-set pipe-number fpc lookup detail show running-config hardware-monitor show cpu-interface-stats Description Display advanced debugging information for the RPM processors. Display receive and transmit counters, error counters and status registers for the forwarding functional area of the FPC (flexible packet classification engine). Display diagnostic and debug information related to the lookup functional area of the Flexible Packet Classification (FPC). Display hardware-monitor action-on-error settings. Provides an immediate snapshot of internal RPM and line card CPU health counters. Offline diagnostics These diagnostics can be useful for isolating faults and debugging TeraScale hardware installed in a chassis. Diagnostics are invoked from the FTOS CLI. While diagnostics are running, the status can be monitored via the CLI. The tests results are written to a file in flash memory and can be displayed on screen. Detailed statistics for all tests are collected and include: • last execution time • first test pass time and last test pass time • first test failure time and last test failure time • total run count • total failure count • consecutive failure count • error code The diagnostics tests are grouped into three levels: Level 0-Check the inventory of devices. Verify the existence of devices (e.g., device ID test). Level 1-Verify the devices are accessible via designated paths (e.g., line integrity tests). Test the internal parts (e.g., registers) of devices. Level 2-Perform on-board loopback tests on various data paths (e.g., data port-pipe and Ethernet). 1090 | E-Series TeraScale Debugging and Diagnostics