Dell Force10 E1200i FTOS Version 8.4.1.5 Configuration Guide for ExaScale - Page 624

www.dell.com | support.dell.com Table 32-2, "MSTP Default Port Cost Values," in Multiple Spanning Tree Protocol lists the default values for port cost by interface. Table 32-2. MSTP Default Port Cost Values Port Cost 100-Mb/s Ethernet interfaces 1-Gigabit Ethernet interfaces 10-Gigabit Ethernet interfaces Port Channel with 100 Mb/s Ethernet interfaces Port Channel with 1-Gigabit Ethernet interfaces Port Channel with 10-Gigabit Ethernet interfaces Default Value 200000 20000 2000 180000 18000 1800 To change the port cost or priority of an interface: Task Change the port cost of an interface. Range: 0 to 200000 Default: Refer to Table 32-2, "MSTP Default Port Cost Values," in Multiple Spanning Tree Protocol. Change the port priority of an interface. Range: 0 to 240, in increments of 16 Default: 128 Command Syntax spanning-tree msti number cost cost spanning-tree msti number priority priority Command Mode INTERFACE INTERFACE View the current values for these interface parameters using the command show config from INTERFACE mode. Refer to the example in Configure an EdgePort. 624 | Multiple Spanning Tree Protocol