Dell Force10 E1200i FTOS Version 8.4.1.5 Configuration Guide for ExaScale - Page 315

To create a manual binding: Step 1 2 3 Task Command Syntax Create an address pool pool name Specify the client IP address. Specify the client hardware address or client-identifier. • hardware-address is the client MAC address. type is the protocol of the hardware platform. The default protocol is Ethernet. client-identifier is required for Microsoft clients instead of a hardware addresses. The client identifier is formed by concatenating the media type and the MAC address of the client. Refer to the "Address Resolution Protocol Parameters" section of RFC 1700-Assigned Numbers, for a list of media type codes. host address hardware-address hardware-address type client-identifier unique-identifier Command Mode DHCP DHCP DHCP Debug DHCP server Task Display debug information for DHCP server. Command Syntax debug ip dhcp server [events | packets] Command Mode EXEC Privilege DHCP Clear Commands Task Clear DHCP binding entries for the entire binding table. Clear a DHCP binding entry for an individual IP address. Clear a DHCP address conflict. Clear DHCP server counters. Command Syntax Command Mode clear ip dhcp binding clear ip dhcp binding ip address clear ip dhcp conflict clear ip dhcp server statistics EXEC Privilege EXEC Privilege EXEC Privilege EXEC Privilege Dynamic Host Configuration Protocol | 315