Dell Force10 E1200i FTOS Version 8.4.1.5 Configuration Guide for ExaScale - Page 1060

www.dell.com | support.dell.com Note: In a VRRP or VRRPv3 group, if two routers come up with the same priority and another router already has MASTER status, the router with master status continues to be master even if one of two routers has a higher IP or IPv6 address. Router 2 R2(conf)#interface gigabitethernet 0/0 R2(conf-if-gi-0/0)#no ip address R2(conf-if-gi-0/0)#ipv6 address 1::1/64 R2(conf-if-gi-0/0)#vrrp-group 10 R2(conf-if-gi-0/0-vrid-10)#virtual-address fe80::10 R2(conf-if-gi-0/0-vrid-10)#virtual-address 1::10 R2(conf-if-gi-0/0-vrid-10)#no shutdown R2(conf-if-gi-0/0)#show config interface GigabitEthernet 0/0 ipv6 address 1::1/64 vrrp-group 10 priority 100 virtual-address fe80::10 virtual-address 1::10 no shutdown R2(conf-if-gi-0/0)#end R2#show vrrp GigabitEthernet 0/0, IPv6 VRID: 10, Version: 3, Net:fe80::201:e8ff:fe6a:c59f VRF: 0 default-vrf State: Master, Priority: 100, Master: fe80::201:e8ff:fe6a:c59f (local) Hold Down: 0 centisec, Preempt: TRUE, AdvInt: 100 centisec Accept Mode: FALSE, Master AdvInt: 100 centisec Adv rcvd: 0, Bad pkts rcvd: 0, Adv sent: 135 Virtual MAC address: 00:00:5e:00:02:0a Virtual IP address: 1::10 fe80::10 Router 3 R3(conf)#interface gigabitethernet 1/0 R3(conf-if-gi-1/0)#no ipv6 address R3(conf-if-gi-1/0)#ipv6 address 1::2/64 R3(conf-if-gi-1/0)#vrrp-group 10 R2(conf-if-gi-1/0-vrid-10)#virtual-address fe80::10 R2(conf-if-gi-1/0-vrid-10)#virtual-address 1::10 R3(conf-if-gi-1/0-vrid-10)#no shutdown R3(conf-if-gi-1/0)#show config interface GigabitEthernet 1/0 ipv6 address 1::2/64 vrrp-group 10 priority 100 virtual-address fe80::10 virtual-address 1::10 no shutdown R3(conf-if-gi-1/0)#end R3#show vrrp GigabitEthernet 1/0, IPv6 VRID: 10, Version: 3, Net: fe80::201:e8ff:fe6b:1845 VRF: 0 default-vrf 1060 | Virtual Router Redundancy Protocol (VRRP)