Dell Latitude LS Service Manual - Page 28
Palmrest Assembly
View all Dell Latitude LS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
If you do not hear a click as each end of the memory module snaps into the tabs, remove the memory module and reinstall it. Palmrest Assembly M2.6 x 1.6-mm screws (6) Figure 14. Removing the Palmrest Assembly Bottom Screws The palmrest assembly consists of the palmrest, status lights, and touch pad assembly. NOTICE: To avoid damaging the system board, you must remove the main battery before you service the computer. 1. Remove the keyboard bezel. 2. Remove the display assembly. 3. Remove the keyboard assembly. 4. Turn the computer upside down on a flat work surface. 5. Remove the six M2.6 x 1.6-mm screws located in the battery bay (see Figure 14). NOTICE: Make sure that the work surface is clean to prevent scratching the computer cover. 6. Turn the computer right-side up. 7. Remove the four black M2 x 4-mm screws across the top of the computer (see Figure 15). 20 Dell Latitude LS Portable Computers Service Manual