Dell Latitude LS Service Manual - Page 36
Speaker
View all Dell Latitude LS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
4. Replace the palmrest assembly. 5. Replace the keyboard assembly. 6. Replace the display assembly. 7. Replace the keyboard bezel. Speaker audio EMI shield M2 x 3.5-mm screws (2) speaker EMI adhesive sponge speaker wire connector Figure 21. Speaker Removal 1. Remove the keyboard bezel. 2. Remove the display assembly. 3. Remove the keyboard assembly. 4. Remove the palmrest assembly. NOTICE: To ensure maximum cooling for the microprocessor, do not touch the glue side of the thermal conductive tape. The oils in your skin reduce the heat transfer capability on the glue side of the tape. 5. Peel up the EMI adhesive sponge that connects the audio EMI shield to the thermal cooling solution (see Figure 21). You only need to peel up the part of the sponge that lays on the thermal cooling solution. The end of the sponge that lays on the audio EMI shield can remain. 28 Dell Latitude LS Portable Computers Service Manual