Dell Latitude LS Service Manual - Page 33

Main Battery, Modem

Page 33 highlights

3. Grasp the RTC battery and pull it out of the holder. You may need to used a small flat-blade screwdriver to carefully pry the battery out of the holder. Main Battery See the "Preparing to Work Inside Your Computer" section found earlier in this manual for detailed instructions for removing the battery. Modem modem M2 x 8.5-mm screw modem retainer bracket Figure 19. Modem Removal 1. Remove the keyboard bezel. 2. Remove the display assembly. 3. Remove the keyboard assembly. 4. Remove the palmrest assembly. 5. Use a 5-mm socket wrench to remove the four 5-mm socket screws for the VGA and parallel ports located on the back of the bottom assembly. 6. Use a small flat-blade screwdriver to remove the two integrated drive electronics (IDE) connector screws at both ends of the IDE (media bay) connector located on the back of the bottom assembly. support.dell.com Dell Latitude LS Portable Computers Service Manual 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

support.dell.com
Dell Latitude LS Portable Computers Service Manual
25
3.
Grasp the RTC battery and pull it out of the holder.
You may need to used a small flat-blade screwdriver to carefully pry the
battery out of the holder.
Main Battery
See the “Preparing to Work Inside Your Computer” section found earlier in this
manual for detailed instructions for removing the battery.
Modem
Figure 19.
Modem Removal
1.
Remove the keyboard bezel.
2.
Remove the display assembly.
3.
Remove the keyboard assembly.
4.
Remove the palmrest assembly.
5.
Use a 5-mm socket wrench to remove the four 5-mm socket screws for the
VGA and parallel ports located on the back of the bottom assembly.
6.
Use a small flat-blade screwdriver to remove the two integrated drive
electronics (IDE) connector screws at both ends of the IDE (media bay)
connector located on the back of the bottom assembly.
M2 x 8.5-mm screw
modem retainer
bracket
modem