Dell Latitude XPi Service Manual - Page 106
I/O Panel, A-9., I/O Panel Removal - cd drivers
View all Dell Latitude XPi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
I/O Panel I/O bracket system board ST8 (4 mm) ST7 (4 mm) ST6 ST5 ST4 ST3 ST2 ST1 D5 (3 mm) NOTE: ST1-ST8 are 8-mm standoff nuts 3 mm 4 mm 8 mm Figure A-9. I/O Panel Removal To remove and replace the I/O panel, follow these steps: 1. Remove the I/O board. See the previous subsection in this appendix. 2. Remove the standoff nuts ST1 through ST8 Use a 3/16 nut driver to remove standoff nuts ST1 through ST6 and a 7/32 nut driver for ST7 and ST8. 3. Remove screw D5. 4. Remove the I/O bracket from the system board. A-24 Dell Latitude XPi CD Service Manual
A-24
Dell Latitude XPi CD Service Manual
I/O Panel
Figure A-9.
I/O Panel Removal
To remove and replace the I/O panel, follow these steps:
1.
Remove the I/O board.
See the previous subsection in this appendix.
2.
Remove the standoff nuts ST1 through ST8
Use a
3/16
nut driver to remove standoff nuts ST1 through ST6 and a
7/32
nut
driver for ST7 and ST8.
3.
Remove screw D5.
4.
Remove the I/O bracket from the system board.
system board
I/O bracket
8 mm
ST5
ST6
ST7 (4 mm)
4 mm
3 mm
D5 (3 mm)
ST4
ST3
ST2
ST1
ST8 (4 mm)
NOTE: ST1–ST8 are
8-mm standoff nuts