Dell Latitude XPi Service Manual - Page 78
Replacing the System Board Assembly, I/O Bracket Clips
View all Dell Latitude XPi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Replacing the System Board Assembly Observe the following precautions when you reinstall a system board: 1. Before reinstalling the system board assembly, make sure the upper I/O bracket clip and the side I/O bracket clip are in place. If the side I/O bracket clip has been dislodged, reinstall it as shown in Figure 4-27. CAUTION: To avoid possible damage to the computer, make sure the system board assembly is inserted under the three molded tabs at the front of the bottom case assembly. Figure 4-28. I/O Bracket Clips I/O bracket clip 2. While reinstalling the system board assembly, make sure the power button is positioned as far as it will go toward the back of the computer. This will ensure that the power button engages the power switch properly. 3. Enter the system's service tag number into the BIOS of the replacement system board assembly. Insert the diskette that accompanied the replacement system board assembly into the diskette drive, and turn on the computer. Follow the instructions on the display screen. 4-40 Dell Latitude XPi CD Service Manual