Dell Latitude XPi Service Manual - Page 61
To remove the LCD panel, follow these steps
View all Dell Latitude XPi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
To remove the LCD panel, follow these steps: 1. Remove the display assembly bezel. 2. Lift the lower edge of the LCD panel about 1 inch. 3. Disconnect the LCD-assembly power cable from connector CN2 on the LCD inverter board. 4. Lift the lower edge of the LCD panel approximately 3 inches. 5. Disconnect the display-assembly interface cable from the LCD interface connector on the underside of the LCD panel. 6. Lift the LCD panel out of the display assembly case. Removing and Replacing Parts 4-23
Removing and Replacing Parts
4-23
To remove the LCD panel, follow these steps:
1.
Remove the display assembly bezel.
2.
Lift the lower edge of the LCD panel about 1 inch.
3.
Disconnect the LCD-assembly power cable from connector CN2 on the
LCD inverter board.
4.
Lift the lower edge of the LCD panel approximately 3 inches.
5.
Disconnect the display-assembly interface cable from the LCD interface
connector on the underside of the LCD panel.
6.
Lift the LCD panel out of the display assembly case.