Dell OptiPlex 3050 Tower Owners Manual - Page 16
Installing 3.5–inch hard drive, Removing the 2.5–inch drive assembly
View all Dell OptiPlex 3050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Installing 3.5-inch hard drive 1 Insert the hard drive into the slot on the chassis. 2 Tighten the screws to secure the hard drive to the chassis. 3 Close the front panel door. 4 Connect the SATA cable and the power cable to the connectors on the hard drive. 5 Install the: a bezel b cover 6 Follow the procedure in After working inside your computer. Removing the 2.5-inch drive assembly 1 Follow the procedure in Before working inside your computer. 2 Remove the: a cover b bezel 3 Open the front panel door. 16 Disassembly and reassembly
Installing 3.5–inch hard drive
1
Insert the hard drive into the slot on the chassis.
2
Tighten the screws to secure the hard drive to the chassis.
3
Close the front panel door.
4
Connect the SATA cable and the power cable to the connectors on the hard drive.
5
Install the:
a
bezel
b
cover
6
Follow the procedure in
After working inside your computer
.
Removing the 2.5–inch drive assembly
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
cover
b
bezel
3
Open the
front panel door
.
16
Disassembly and reassembly