Dell OptiPlex 3050 Tower Owners Manual - Page 30
Installing WLAN card
View all Dell OptiPlex 3050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Installing WLAN card 1 Insert the WLAN card into the connector on the WLAN module. 2 Connect the WLAN antenna cables to the connectors on the WLAN card. 3 Place the WLAN card bracket to secure the WLAN cables. 4 Tighten the screw to secure the WLAN card to the system. 5 Pull the release latch to open [1]. 6 To remove the PCIe brackets (1 and 3) as shown below, insert a screwdriver in the hole of a bracket and push hard to release the bracket [2], and then lift the bracket out from your computer. NOTE: To remove the PCIe brackets (2 and 4), push the bracket upwards from the inside of your computer to release it and then lift the bracket away from your computer. 30 Disassembly and reassembly
Installing WLAN card
1
Insert the WLAN card into the connector on the WLAN module.
2
Connect the WLAN antenna cables to the connectors on the WLAN card.
3
Place the WLAN card bracket to secure the WLAN cables.
4
Tighten the screw to secure the WLAN card to the system.
5
Pull the release latch to open [1].
6
To remove the PCIe brackets (1 and 3) as shown below, insert a screwdriver in the hole of a bracket and push hard to release the
bracket [2], and then lift the bracket out from your computer.
NOTE:
To remove the PCIe brackets (2 and 4), push the bracket upwards from the inside of your computer to release it
and then lift the bracket away from your computer.
30
Disassembly and reassembly