Dell OptiPlex 3050 Tower Owners Manual - Page 70
Table 10. System, Enable Smart Reporting option
View all Dell OptiPlex 3050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Table 10. System Configuration Option Integrated NIC SATA Operation Serial Port Drives Smart Reporting USB Configuration Front USB Configuration Rear USB Configuration USB PowerShare Audio Miscellaneous Description Allows you to control the on-board LAN controller. The option 'Enable UEFI Network Stack' is not selected by default. The options are: • Disabled • Enabled • Enabled w/PXE (default) NOTE: Depending on the computer and its installed devices, the items listed in this section may or may not appear. Allows you to configure the operating mode of the integrated hard drive controller. • Disabled = The SATA controllers are hidden • RAID ON = SATA is configured to support RAID mode (selected by default) • AHCI= SATA is configured for AHCI mode Allows you to determine how the built-in serial port to operate. The options are: • Disabled • COM 1 - Default setting • COM 2 • COM 3 • COM 4 Allows you to enable or disable the various drives on-board: • SATA-0 • SATA-1 • SATA-2 • SATA-3 • SATA-4 This field controls whether hard drive errors for integrated drives are reported during system startup. The Enable Smart Reporting option is disabled by default. Allows you to enable or disable the integrated USB controller for: • Enable Boot Support • Enable Front USB Ports • Enable Rear USB Ports All the options are enabled by default. Allows you to enable or disable the front USB ports. All the ports are enabled by default. Allows you to enable or disable the back USB ports. All the ports are enabled by default. This option allows you to charge the external devices, such as mobile phones, music player. This option is disabled by default. Allows you to enable or disable the integrated audio controller. The option Enable Audio is selected by default. • Enable Microphone • Enable Internal Speaker Both the options are selected by default. Allows you to enable or disable the various on-board devices. 70 System setup