Dell OptiPlex 3050 Tower Owners Manual - Page 50

Installing system fan

Get Dell OptiPlex 3050 PDF manuals and user guides View all Dell OptiPlex 3050 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

Installing system fan 1 Insert the grommets into the slots on the back of the computer. 2 Hold the system fan with the cable facing the bottom of the computer. 3 Align the grooves of the system fan with the grommets on the chassis wall. 4 Pass the grommets through the corresponding grooves on the system fan. 5 Stretch the grommets and slide the system fan toward the computer until it locks into place. NOTE: Install the lower two grommets first. 6 Connect the system fan cable to the connector on the system board. 7 Secure the intrusion switch cable to the system fan with an adhesive tape. 8 Route the intrusion cable through the system fan grommet. 9 Connect the intrusion switch cable to the connector on the system board. 10 Close the front panel door. 11 Install the: a bezel b cover 12 Follow the procedure in After working inside your computer. 50 Disassembly and reassembly

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
Installing system fan
1
Insert the grommets into the slots on the back of the computer.
2
Hold the system fan with the cable facing the bottom of the computer.
3
Align the grooves of the system fan with the grommets on the chassis wall.
4
Pass the grommets through the corresponding grooves on the system fan.
5
Stretch the grommets and slide the system fan toward the computer until it locks into place.
NOTE:
Install the lower two grommets
first.
6
Connect the system fan cable to the connector on the system board.
7
Secure the intrusion switch cable to the system fan with an adhesive tape.
8
Route the intrusion cable through the system fan grommet.
9
Connect the intrusion switch cable to the connector on the system board.
10
Close the front panel door.
11
Install the:
a
bezel
b
cover
12
Follow the procedure in
After working inside your computer
.
50
Disassembly and reassembly