Dell OptiPlex 3050 Tower Owners Manual - Page 55
Installing the system board
View all Dell OptiPlex 3050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Installing the system board 1 Hold the system board by its edges and align it toward the back of the computer. 2 Lower the system board into the computer until the connectors at the back of the system board align with the slots on the chassis, and the screw holes on the system board align with the standoffs on the computer. 3 Tighten the screws to secure the system board to the computer. 4 Route all the cables through the routing clips. 5 Align the cables with the pins on connectors on the system board and connect the following cables to the system board: a intrusion switch b system fan c power distribution for optical drive and hard drive d PSU (2 cables) e optical dive and hard drive cables (4 cables) f speaker g power switch 6 Install the: a VGA daughter board b memory module c SD card reader Disassembly and reassembly 55