Dell OptiPlex 3050 Tower Owners Manual - Page 47
Installing heat sink assembly, Processor, Removing processor
View all Dell OptiPlex 3050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Installing heat sink assembly 1 Align the screws of the heat sink assembly with the holders on the system board. 2 Place the heat sink assembly on the processor. 3 Tighten the captive screws to secure the heat sink assembly to the system board. 4 Connect the heat sink assembly cable to the connector on the system board. 5 Close the front panel door. 6 Install the: a bezel b cover 7 Follow the procedure in After working inside your computer. Processor Removing processor 1 Follow the procedure in Before working inside your computer. 2 Remove the: a cover b bezel 3 Open the front panel door. 4 Remove the heat sink assembly. 5 To remove the processor: a Release the socket lever by pushing the lever down and out from under the tab on the processor shield [1]. b Lift the lever upward and lift the processor shield [2]. c Lift the processor out of the socket [3]. CAUTION: Do not touch the processor socket pins, they are fragile and can be permanently damaged. Be careful not to bend the pins in the processor socket when removing the processor out of the socket. Disassembly and reassembly 47