Dell OptiPlex 3050 Tower Owners Manual - Page 49
System fan, Removing system fan
View all Dell OptiPlex 3050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
System fan Removing system fan 1 Follow the procedure in Before working inside your computer. 2 Remove the: a cover b bezel 3 Open the front panel door. 4 To remove the system fan: a Press the notch and disconnect the intrusion switch cable from the connector on the system board [1]. b Unroute the intrusion switch cable from the fan grommet as shown in the image [2]. c Remove the tape that holds the intrusion switch cable on the system fan and move the cable away [3]. d Disconnect the system fan cable from the connector on the system board [1]. e Pull the grommets securing the fan to remove the grommets from the system [2]. f Slide the system fan out of the computer [3]. Disassembly and reassembly 49
System fan
Removing system fan
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
cover
b
bezel
3
Open the
front panel door
.
4
To remove the system fan:
a
Press the notch and disconnect the intrusion switch cable from the connector on the system board [1].
b
Unroute the intrusion switch cable from the fan grommet as shown in the image [2].
c
Remove the tape that holds the intrusion switch cable on the system fan and move the cable away [3].
d
Disconnect the system fan cable from the connector on the system board [1].
e
Pull the grommets securing the fan to remove the grommets from the system [2].
f
Slide the system fan out of the computer [3].
Disassembly and reassembly
49