Dell OptiPlex 3050 Tower Owners Manual - Page 23
Installing SD card reader, Memory module, Removing memory module
View all Dell OptiPlex 3050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Installing SD card reader 1 Insert the SD card reader into the slot on the front panel door. 2 Tighten the screw to secure the SD card reader to the front panel door. 3 Connect the SD card reader cable to the connector on the system board. 4 Close the front panel door. 5 Install the: a bezel b cover 6 Follow the procedure in After working inside your computer. Memory module Removing memory module 1 Follow the procedure in Before working inside your computer. 2 Remove the: a cover b bezel 3 Open the front panel door. 4 To remove the memory module: a Push the memory module retention tabs on both sides of the memory module. b Lift the memory module from the memory module connector on the system board. Installing memory module 1 Align the notch on the memory module with the tab on the memory module connector. 2 Insert the memory module into the memory module socket. 3 Press the memory module until the memory module retention tabs click into place. 4 Close the front panel door. 5 Install the: a cover b bezel 6 Follow the procedure in After working inside your computer. Disassembly and reassembly 23