Dell OptiPlex 3050 Tower Owners Manual - Page 31
Insert the WLAN module into the connector on the system board and press until it is secured
View all Dell OptiPlex 3050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
7 Insert the WLAN module into the connector on the system board and press until it is secured. NOTE: The WLAN module can be installed in PCIe slots 1 and 4 only. 8 Connect the WLAN module cable to the connector on the system board. 9 Tighten the antenna screw to install the antenna. 10 Close the release latch. 11 Close the front panel door. 12 Install the: a bezel b cover 13 Follow the procedure in After working inside your computer. Disassembly and reassembly 31
7
Insert the WLAN module into the connector on the system board and press until it is secured.
NOTE:
The WLAN module can be installed in PCIe slots 1 and 4 only.
8
Connect the WLAN module cable to the connector on the system board.
9
Tighten the antenna screw to install the antenna.
10
Close the release latch.
11
Close the front panel door.
12
Install the:
a
bezel
b
cover
13
Follow the procedure in
After working inside your computer
.
Disassembly and reassembly
31