Dell PowerConnect B-8000 Reference Manual

Dell PowerConnect B-8000 Manual

Get Dell PowerConnect B-8000 PDF manuals and user guides View all Dell PowerConnect B-8000 manuals
Add to My Manuals
Save this manual to your list of manuals

Dell PowerConnect B-8000 manual content summary:

  • Dell PowerConnect B-8000 | Reference Manual - Page 1
    53-1001788-01 January 31, 2010 PowerConnect B-8000 Hardware Reference Manual 53-1001788-01 *53-1001788-01*
  • Dell PowerConnect B-8000 | Reference Manual - Page 2
    to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. Regulatory Model Codes: Brocade DCX-4S, Brocade DCX ii PowerConnect B-8000 Hardware Reference Manual 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 3
    This Document In this chapter vii How this document is organized vii Supported hardware and software vii What's new in this document viii Document required for installation 7 Standalone installation for a PowerConnect B-8000 7 PowerConnect B-8000 Hardware Reference Manual iii 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 4
    PowerConnect B-8000 8 PowerConnect B-8000 configuration 8 Providing power to the switch 8 Creating a serial connection 9 Switch IP address 9 Date and time settings 10 Brocade Inter-Switch Link (ISL) Trunking 13 PowerConnect B-8000 Operation In this chapter 15 Powering the PowerConnect B-8000
  • Dell PowerConnect B-8000 | Reference Manual - Page 5
    CE statement 37 Canadian requirements 38 Laser compliance 38 RTC battery 38 Electrical safety 38 Regulatory certifications 39 Environmental regulation compliance 40 China RoHS 40 PowerConnect B-8000 Hardware Reference Manual v 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 6
    vi PowerConnect B-8000 Hardware Reference Manual 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 7
    feature list, and a look at the appearance of the switch. • Chapter 2, "PowerConnect B-8000 Installation and Configuration" provides the information needed to install the switch into your network. • Chapter 3, "PowerConnect B-8000 Operation" discusses the day-to-day operational procedures for using
  • Dell PowerConnect B-8000 | Reference Manual - Page 8
    PowerConnect B-8000 CEE-only platform and licensing information for upgrading from CEE-only to the full FCoE switch has been added. Information about an additional FOS release that supports the switch command names in the narrative portions of this guide are presented in mixed lettercase: for example
  • Dell PowerConnect B-8000 | Reference Manual - Page 9
    the Brocade Glossary. For definitions of SAN-specific terms, visit the Storage Networking Industry Association online dictionary at: http://www.snia.org/education/dictionary Notice of their respective companies and corporations. PowerConnect B-8000 Hardware Reference Manual ix 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 10
    practice guides, support, including product repairs and part ordering. To expedite your call, have the following information available: 1. General Information • Switch model • Switch operating system version • Error numbers and messages received • supportSave command output x PowerConnect B-8000
  • Dell PowerConnect B-8000 | Reference Manual - Page 11
    problem, and specific questions • Description of any troubleshooting steps already performed and the results • Serial console and Telnet session logs • syslog message logs 2. Switch Serial Number The switch suggestions for improvement. PowerConnect B-8000 Hardware Reference Manual xi 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 12
    xii PowerConnect B-8000 Hardware Reference Manual 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 13
    of the supportSave command and storage for configuration uploads and downloads. • Two hot-swappable, redundant power supply FRUs. • Three hot-swappable fan assembly FRUs in an N+1 configuration to provide hardware-redundant cooling. PowerConnect B-8000 Hardware Reference Manual 1 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 14
    -branded SFP optical transceivers that support any combination of Short Wavelength (SWL) and Long Wavelength (LWL) optical media among the switch ports. • Support for unicast, multicast (255 groups), and broadcast data traffic types. 2 PowerConnect B-8000 Hardware Reference Manual 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 15
    Port side of the PowerConnect B-8000 1 • Brocade FOS, which delivers distributed intelligence throughout the network and enables a wide range of value-added applications including Brocade Advanced Web Tools and Brocade Zoning. Optional Fabric Services include: Adaptive Networking with QoS, Brocade
  • Dell PowerConnect B-8000 | Reference Manual - Page 16
    supplies (including the AC power receptacle and AC power switch) and fans. 1 2 3 4 5 FIGURE 2 Non-port side of the PowerConnect B-8000 1 Power supply #2 2 Fan assembly #3 3 Fan assembly #2 4 Fan assembly #1 5 Power supply #1 4 PowerConnect B-8000 Hardware Reference Manual 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 17
    6 ft. Power Cord • Rubber feet, required for setting up the switch as a standalone unit • Brocade Family Doc CD • Powerconnect B-8000 QuickStart Guide • EZSwitch Setup CD If you have ordered the CEE-only, base model PowerConnect B-8000, all the above items are included except the eight SFP+ modules
  • Dell PowerConnect B-8000 | Reference Manual - Page 18
    assembly. • The additional weight of the switch does not exceed the cabinet's weight limits or unbalance the cabinet in any way. • The cabinet is secured to ensure stability in case of unexpected movement, such as an earthquake. 6 PowerConnect B-8000 Hardware Reference Manual 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 19
    included with the PowerConnect B-8000" on page 5. Verify the items are present and undamaged. 2. Apply the adhesive rubber feet. Applying the rubber feet onto the switch helps prevent the switch from sliding off the supporting surface. PowerConnect B-8000 Hardware Reference Manual 7 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 20
    8. ATTENTION Do not connect the switch to the network until the IP address is correctly set. For instructions on how to set the IP address, see "PowerConnect B-8000 configuration" Cabinet installation for a PowerConnect B-8000 Follow the installation instructions shipped with the appropriate rack
  • Dell PowerConnect B-8000 | Reference Manual - Page 21
    Host Configuration Protocol) server to set the IP address of the switch. DHCP is enabled by default. The PowerConnect B-8000 supports both IPv4 and IPv6. Using DHCP to set the IP address When using DHCP, the PowerConnect B-8000 obtains its IP address, subnet mask, and default gateway address from
  • Dell PowerConnect B-8000 | Reference Manual - Page 22
    time are used for logging events. Switch operation does not depend on the date and time; a PowerConnect B-8000 with an incorrect date and time value still functions properly. However, because the date and time are used for logging, error detection, and troubleshooting, you should set them correctly
  • Dell PowerConnect B-8000 | Reference Manual - Page 23
    server (FCS) switch to a maximum of eight external network time protocol (NTP to switches earlier than v5.3.0 because IPv6 is supported for Fabric OS version switch:admin> date Fri Sep 29 17:01:48 UTC 2007 switch:admin> date "0927123007" PowerConnect B-8000 Hardware Reference Manual 11 53-
  • Dell PowerConnect B-8000 | Reference Manual - Page 24
    time using NTP Perform the following steps to synchronize the local time using NTP. 1. Log into the switch using the default password, which is password. 2. Enter the tsClockServer command: switch:admin> tsclockserver "" 12 PowerConnect B-8000 Hardware Reference Manual 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 25
    PowerConnect B-8000 can be used as a trunking group to achieve speeds up to 64 Gbps (128 Gbps full duplex) for optimal bandwidth utilization and load balancing. For more information about Brocade ISL Trunking, see the Fabric OS Administrator's Guide. PowerConnect B-8000 Hardware Reference Manual
  • Dell PowerConnect B-8000 | Reference Manual - Page 26
    2 PowerConnect B-8000 configuration 14 PowerConnect B-8000 Hardware Reference Manual 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 27
    POST, or other diagnostic tests. This is normal; it does not indicate a problem unless the LEDs do not indicate a healthy state after all boot processes and diagnostic tests are complete. PowerConnect B-8000 LEDs The PowerConnect B-8000 has the following LEDs: • One system status LED (above) on the
  • Dell PowerConnect B-8000 | Reference Manual - Page 28
    side of the switch. 1 2 3 4 5 1 Power supply #2 status LED 2 Power supply #1 status LED 3 Fan assembly #3 status LED 4 Fan assembly #2 status LED 5 Fan assembly #1 status LED FIGURE 4 LEDs on non-port side of PowerConnect B-8000 16 PowerConnect B-8000 Hardware Reference Manual 53-1001788
  • Dell PowerConnect B-8000 | Reference Manual - Page 29
    If the system power LED is not green, the unit may be faulty. Contact your switch service provider. System is on and power supplies No action required. are functioning properly. System is . No action required. No action required. PowerConnect B-8000 Hardware Reference Manual 17 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 30
    Technical Support if switch is first powered on the power supply status LED will show amber until POST has completed. Try the following: Check the power cable connection. Verify that the power supply is powered on. Replace the power supply FRU. 18 PowerConnect B-8000 Hardware Reference Manual
  • Dell PowerConnect B-8000 | Reference Manual - Page 31
    : 1. Performs universal port configuration. 2. Initializes links. 3. Analyzes fabric. If any ports are connected to other switches, the switch participates in a fabric configuration. 4. Obtains a domain ID and assigns port addresses. PowerConnect B-8000 Hardware Reference Manual 19 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 32
    , and on accessing the error log, refer to the Fabric OS Administrator's Guide. For information about error messages, refer to the Fabric OS Message Reference Manual. PowerConnect B-8000 Maintenance The PowerConnect B-8000 is designed for high availability and low failure; it does not require any
  • Dell PowerConnect B-8000 | Reference Manual - Page 33
    to POST, Fabric OS includes diagnostic tests to help you troubleshoot the hardware and firmware. This includes tests of internal console set up to the serial connection to the switch. Some tests require the ports to be connected by . PowerConnect B-8000 Hardware Reference Manual 21 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 34
    for the PowerConnect B-8000 Switch Management Tool Out-of-band Support In-band Support Command line interface (CLI) Up to two admin sessions and four user sessions simultaneously. For more information, refer to the Fabric OS Administrator's Guide, Fabric OS Command Reference Manual, and the
  • Dell PowerConnect B-8000 | Reference Manual - Page 35
    PowerConnect B-8000 Management 3 NOTE To achieve in-band support for IP over Fibre Channel, the software must be run on both the HBA and the switch, and it must be supported by both the HBA and HBA driver. PowerConnect B-8000 Hardware Reference Manual 23 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 36
    3 PowerConnect B-8000 Management 24 PowerConnect B-8000 Hardware Reference Manual 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 37
    part warranty and regulatory certifications. There are no user-serviceable parts inside the power supply. The cooling system relies on pressurized air, do not leave either of the power supply slots empty longer than two minutes when PowerConnect B-8000 Hardware Reference Manual 25 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 38
    switched off - amber for ~ 5 seconds, then off • The power cable is disconnected - amber for ~ 5 seconds, then off • The power supply has failed NOTE: When the PowerConnect B-8000 PowerConnect B-8000 should require less than two minutes to complete. 26 PowerConnect B-8000 Hardware Reference Manual
  • Dell PowerConnect B-8000 | Reference Manual - Page 39
    . 1. To leave the PowerConnect B-8000 in service while replacing a power supply, verify that the other power supply (the one not being replaced) has been powered on for at least four seconds and has a steady green LED. 2. Power off the power supply by pressing the AC power switch to the "0" symbol
  • Dell PowerConnect B-8000 | Reference Manual - Page 40
    supply 2. FIGURE 7 Inserting the power supply in the Switch 1 2 34 5 1 PowerConnect B-8000 chassis 2 Power supply 3 Status LED 4 Handle 5 Captive screw 6 AC Power receptacle 7 AC power switch 67 RRP: Fan assembly The PowerConnect B-8000 has three fan assemblies as displayed in Figure 8. Fabric
  • Dell PowerConnect B-8000 | Reference Manual - Page 41
    no user-serviceable parts inside PowerConnect B-8000 should require less than two minutes to complete. Items required The following items are required to replace a fan assembly in the PowerConnect B-8000: • New fan assembly • Phillips-head screwdriver #1 PowerConnect B-8000 Hardware Reference Manual
  • Dell PowerConnect B-8000 | Reference Manual - Page 42
    using the Web Tools application. See Figure 8 for the locations of the fan assemblies. FIGURE 9 Inserting the fan assembly in the PowerConnect B-8000 1 1 PowerConnect B-8000 chassis 2 Fan Assembly 3 Captive Screw 4 Handle 2 43 30 PowerConnect B-8000 Hardware Reference Manual 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 43
    two fans each. The fans have two speeds, which are set automatically and cannot be modified. They default to high speed upon boot, then switch to low speed as Fabric OS comes online, returning to high speed only as required. PowerConnect B-8000 Hardware Reference Manual 31 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 44
    . Each power supply has a built-in fan for cooling, pushing air towards the port side of the switch. Table 8 lists the power supply specifications for the PowerConnect B-8000. TABLE 8 Power Supply Specifications Specification Value Maximum output of one power supply 350 watts System DC power
  • Dell PowerConnect B-8000 | Reference Manual - Page 45
    M_Port Nonblocking shared-memory switch Freescale MPC8548 x 1.3GHz FC-PH (Fibre Channel Physical and Signalling Interface standard) Fibre Channel Class 2 and Class 3 Complies with FC-SW-3 Rev. 6.6 Complies with FC-IP 2.3 of FCA profile PowerConnect B-8000 Hardware Reference Manual 33 53-1001788
  • Dell PowerConnect B-8000 | Reference Manual - Page 46
    ranges TABLE 10 General specifications Specification Description Aggregate switch I/O bandwidth FC Port-to-port latency 10 km (6.2 miles) Up to 500 km at 1G is supported when using long distance transport system such as DWDM. 34 PowerConnect B-8000 Hardware Reference Manual 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 47
    of the switch. The PowerConnect B-8000 uses an RJ45 connector for the serial port. An RJ45 to DB9 adaptor cable is also provided with the switch. NOTE To protect the serial port from damage, keep the cover on the port when not in use. PowerConnect B-8000 Hardware Reference Manual 35 53-1001788
  • Dell PowerConnect B-8000 | Reference Manual - Page 48
    instruction manual, might cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at the user's own expense. 36 PowerConnect B-8000 Hardware
  • Dell PowerConnect B-8000 | Reference Manual - Page 49
    in a domestic environment, radio disturbance might arise. When such trouble occurs, the user might be required to take corrective actions. Power cords (Japan Denan) BSMI statement (Taiwan) The BSMI Statement is applicable to PowerConnect B-8000 power supplies. CE statement ATTENTION This is a Class
  • Dell PowerConnect B-8000 | Reference Manual - Page 50
    . Contact your switch supplier if the real-time clock begins to lose time. Electrical safety CAUTION This switch might have more than one power cord. To reduce the risk of electric shock, disconnect both power cords before servicing. 38 PowerConnect B-8000 Hardware Reference Manual 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 51
    Table 15 lists the regulatory compliance standards for which the PowerConnect B-8000 is certified. TABLE 15 Regulatory compliance standards Country Standards Agency Tick mark GOST mark KCC mark Class A CCC logo BSMI mark PowerConnect B-8000 Hardware Reference Manual 39 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 52
    RoHS" environmental regulatory compliance requirements for the PowerConnect B-8000 switch. China RoHS The contents included in this operating manual of the product. EPUP EPUP FRU Brocade Brocade CD Br ocade EPUP 40 PowerConnect B-8000 Hardware Reference Manual 53-
  • Dell PowerConnect B-8000 | Reference Manual - Page 53
    (CR6+) Polybrominated Biphenyl (PBB) Polybrominated Diphenyl Ether (PBDE) Fibre Channel X O O O O O Switch Fan, Blower X O O O O O assemblies PCBA cards X O O O O O Power within the aforementioned limits. PowerConnect B-8000 Hardware Reference Manual 41 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 54
    A Environmental regulation compliance 42 PowerConnect B-8000 Hardware Reference Manual 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 55
    (CLI), 22 compact flash memory, 35 PowerConnect B-8000 Hardware Reference Manual 53-1001788-01 configuration date and time, 10 provide power, 8 serial connection, 9 switch IP address, 9 terminal emulator, 9 configuring the PowerConnect B-8000, 8 Converged Enhanced Ethernet, see CEE country
  • Dell PowerConnect B-8000 | Reference Manual - Page 56
    safety considerations, 5 stand-alone PowerConnect B-8000, 7 installing SFP or SFP+, 20 interpreting LED activity, 15 POST results, 20 Inter-Switch Link see ISL IP over Fibre port speeds, 2 port types, 2 ports on demand, 7, 13, 22 POST, 19 PowerConnect B-8000 Hardware Reference Manual 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 57
    32 serial ports, 35 static IP address IPv4, 10 IPv6, 10 switch capabilities, 1 components, 31 management, 22 switch IP address, 9 static, 10 using DHCP, 9 switchShow, 20 12 U upgrade, 5, 22 V VCCI statement, 37 W weight, 32 PowerConnect B-8000 Hardware Reference Manual 45 53-1001788-01
  • Dell PowerConnect B-8000 | Reference Manual - Page 58
    46 PowerConnect B-8000 Hardware Reference Manual 53-1001788-01
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
53-1001788-01
January 31, 2010
53-1001788-01
*53-1001788-01*
PowerConnect B-8000
Hardware Reference Manual