Dell PowerEdge 1855 Avocent Digital Access KVM Module Installation Informati - Page 32
Changing the Display Behavior, Press <Print Screen>.
View all Dell PowerEdge 1855 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
www.dell.com | support.dell.com 5 Click OK. To remove a server module from the Scan list: 1 In the Scan dialog box, click to disable the check box next to a server module to be removed. -orDouble-click on a server module's name or slot. -orClick the Clear button to remove all server modules from the Scan list. 2 Click OK. To start the scan mode: 1 Press . 2 Click Commands. 3 Select Scan Enable in the Command dialog box. To cancel scan mode: 1 Select a server module if OSCAR is open. -orMove the mouse or press any key on the keyboard if OSCAR is not open. Scanning will stop at the currently selected server module. -orPress . 2 Click Commands. 3 Clear Scan Enable. Changing the Display Behavior Use the Menu dialog box to change the display order of server modules and set a screen delay time for OSCAR. To access the Menu dialog box: 1 Press to launch OSCAR. 2 Click Setup - Menu. To choose the display order of server modules in the Main dialog box: 1 Select Name to display server modules alphabetically by name. -orSelect Slot to display server modules numerically by slot number. 2 Click OK. 30 Configuring the KVM Switch Module