Dell PowerEdge 1855 Avocent Digital Access KVM Module Installation Informati - Page 37
Avocent Digital Access KVM Module-Remote Operation, Configuring the Avocent Digital Access KVM Module - virtualization
View all Dell PowerEdge 1855 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Avocent Digital Access KVM Module-Remote Operation The Avocent Digital Access KVM switch module allows you to manage server modules and virtual media from a remote location. Configuring the Avocent Digital Access KVM Module Use the DRAC/MC GUI to configure the Avocent Digital Access KVM Module. 1 Open a Web browser. 2 In the Address field, type the IP address of the DRAC/MC that is connected to the Avocent Digital Access KVM Module, and then press . 3 In the Logon box, type your user name and password, and then click OK. NOTE: The default user name is root; the default password is calvin. 4 Turn on the system containing the KVM module. Ensure that the system power indicator is green before proceeding to step 5. 5 Click the Configuration tab and select Network. 6 Use the Network Configuration page to configure the Avocent Digital Access KVM module's NIC settings. Table 2-3 describes each NIC setting. NOTE: To ensure proper communications between the Avocent Digital Access KVM Module and the DRAC/MC, configure your Avocent Digital Access KVM Module's IP address in the same subnet as the DRAC/MC. NOTE: To change any of the settings on the Network Configuration page, you must have Configure DRAC/MC permission. Configuring the KVM Switch Module 35