Dell PowerEdge M420 8/4 Gbps FC SAN Module Administrator's Guide - Page 20

2 Port mapping 3. Enter the ag --mapshow command and specify the port number to display the list of mapped internal ports (F_Ports). Verify that the added internal ports (F_Ports) appear in the list. switch:admin> ag --mapshow 13 N_Port : 13 Failover(1=enabled/0=disabled) : 1 Failback(1=enabled/0=disabled) : 1 Current F_Ports : None Configured F_Ports : 6;7 PG_ID : 0 PG_Name : pg0 Removing internal ports (F_Ports) from external ports (N_Ports) 1. Connect to the FC SAN Module and log in using an account assigned to the admin role. 2. Enter the ag --mapdel command to remove the internal port from the external port. The f_portlist can contain multiple internal port numbers separated by semicolons, for example "17;18". switch:admin> ag --mapdel 17;18 F-Port to N-Port mapping has been updated successfully 3. Enter the switchshow command to verify that the internal port is free (unassigned). Unassigned F_Port status is Disabled (No mapping for internal port). See port 6 in the following example. switch:admin> switchshow switchName: fsw534_4016 switchType: 45.0 switchState: Online switchMode: Access Gateway Mode switchWwn: 10:00:00:05:1e:02:1d:b0 switchBeacon: OFF Area Port Media Speed State Proto 0 0 cu AN No_Sync 1 1 cu AN No_Sync Disabled (N-Port Offline for F-Port) 2 2 cu AN No_Sync Disabled (N-Port Offline for F-Port) 3 3 cu AN No_Sync Disabled (N-Port Offline for F-Port) 4 4 cu AN No_Sync Disabled (N-Port Offline for F-Port) 5 5 cu AN No_Sync Disabled (N-Port Offline for F-Port) 6 6 cu AN No_Sync Disabled (No mapping for F-Port) 7 7 cu AN No_Sync 8 8 cu AN No_Sync 9 9 cu AN No_Sync 10 10 -- N4 No_Module 11 11 -- N4 No_Module 12 12 -- N4 No_Module 13 13 id N4 Online N-Port 10:00:00:05:1e:35:10:1e 0x5a0a00 14 14 id N4 Online N-Port 10:00:00:05:1e:35:10:1e 0x5a0900 15 15 id N4 Online N-Port 10:00:00:05:1e:35:10:1e 0x5a0800 6 Dell 8/4Gbps FC SAN Module Administrator's Guide 53-1001345-01