Dell PowerEdge M420 8/4 Gbps FC SAN Module Administrator's Guide - Page 62

B firmwareDownloadStatus [10]: Thu Jul 28 00:37:50 2007 Slot 7 (SAS): Firmware commit has completed. To display the status of a firmware download on a switch: switch:admin> firmwaredownloadstatus [1]: Fri Feb 15 22:17:03 2007 Firmware is being downloaded to the switch. This step may take up to 30 minutes. [2]: Fri Feb 15 22:20:54 2007 Firmware has been downloaded to the secondary partition of the switch. [3]: Fri Feb 15 22:22:19 2007 The firmware commit operation has started. This may take up to 10 minutes. [4]: Fri Feb 15 22:22:51 2007 Switch is relocating an internal firmware image. [5]: Fri Feb 15 22:25:15 2007 The commit operation has completed successfully. [6]: Fri Feb 15 22:25:46 2007 The internal firmware image is relocated successfully. [7]: Fri Feb 15 22:25:46 2007 Firmwaredownload command has completed successfully. Use firmwareshow to verify the firmware versions. To display the status of a firmware download on a chassis: switch:admin> firmwaredownloadstatus [1]: Mon Dec 19 18:40:19 2007 Slot 6 (CP1, active): Firmware is being downloaded to standby CP. This step may take up to 30 minutes. [2]: Mon Dec 19 18:46:18 2007 Slot 6 (CP1, active): Firmware has been downloaded successfully to Standby CP. [3]: Mon Dec 19 18:46:25 2007 Slot 6 (CP1, active): Standby CP is going to reboot with new firmware. [4]: Mon Dec 19 18:47:45 2007 Slot 6 (CP1, active): Standby CP booted successfully with new firmware. [5]: Mon Dec 19 18:47:56 2007 Slot 8 (FR4-18i): Firmware is being downloaded to the blade. This step may take up to 10 minutes. [6]: Mon Dec 19 18:48:50 2007 Slot 5 (CP0, active): Forced failover succeeded. New Active CP is running new firmware [7]: Mon Dec 19 18:48:57 2007 Slot 5 (CP0, active): Firmware is being download to standby CP. This step may take up to 30 minutes. [8]: Mon Dec 19 18:49:28 2007 48 Dell 8/4Gbps FC SAN Module Administrator's Guide 53-1001345-01